ADSS All Dielectric Self Support Aerial Cable for Telecom Distribution Networks
Description
ADSS (All-Dielectric Self-Supporting) cable is ideal for installation in distribution as well as transmission environments, even when live-line installations are required. As its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass, making ADSS an economical and simple means of achieving a fiber optic network. AFL manufactures its own line of attachment hardware as well as supplies formed wire fittings when preferred.
Application
Erect on the same pole with power line in new and old power line.
A long span Areas of strong electric field, thunder weather, etc
Utilized for telecommunications by power utilities, telcos, and private network groups
Designed for installation on distribution and transmission lines
Capable of being installed in close proximity to conductors if security is a concern
Suitable for underbuild applications, minimizing the need for outages
Used for telecom networks where quick, low-cost installation is a priority
Features
Suitable for use on distribution and high voltage transmission lines
Requires no messenger wire -- fully self-supporting
Single pass installation -- no messenger, no lashing wire -- faster and lower cost
Cable is water-blocked using dry core technology, therefore no messy flooding compounds
Small cable Diameter, light weight, 1,000m span, low attached load on tower.
Tension strength is over 90KN.
Non-metal structure, good insulation, anti-thunder.
Fine production technology, even force for aramid fiber, with superior stress flexibility.
Anti electro-corrosion.
Adapt for bad climate.
May construct without power cut, a power line failure doesn’t influence cable’s normal transfer.
loose cover GYTA cable core, non-metallic core reinforced.
Tension units are elastic modulus aramid fiber.
Electric trace resistant outer sheath is adopted to run safely under a circumstance of space electric field (E) ≤25KV/m.
Specification
| ADSS with PE Sheath (Parts) |
| Order Type Model | ADSS-PE 24 M15.5/ A | ADSS-PE48 M17.7 / C | ADSS-PE72 M21.2 / D |
| Fiber count | 24fiber | 48fiber | 72fiber |
| Size of tube | φ2.1mm | φ2.6mm | φ3.0mm |
| Cable diameter | φ13.4mm | φ14.9mm | φ16.4mm |
| Cable weight | 139kg/km | 172kg/km | 209kg/km |
| RTS | 38.8kN | 44.3kN | 56.6kN |
| Linear expansion coefficient | 2.2×10-6/℃ | 2.0×10-6/℃ | 1.8×10-6/℃ |
| Young’s modulus | 16.5kN/mm2 | 17.5kN/mm2 | 18.6kN/mm2 |
| ADSS with AT Sheath (parts) |
| Order Type Model | ADSS-AT 24 M14 / A | ADSS-AT48M15.2 / C | ADSS-AT72 M21.2 / D |
| Fiber count | 24fiber | 48fiber | 72fiber |
| Size of tube | φ2.1mm | φ2.6mm | φ3.0mm |
| Cable diameter | φ13.2mm | φ14.3mm | φ16.3mm |
| Cable weight | 146kg/km | 169kg/km | 220kg/km |
| RTS | 35kN | 37.9kN | 52.9kN |
| Linear expansion coefficient | 4.5×10-6/℃ | 4.8×10-6/℃ | 3.6×10-6/℃ |
| Young’s modulus | 15.5kN/mm2 | 14.9kN/mm2 | 17.9kN/mm2 |
Ordering Information
Cable type:SM or MM( Sinlge-mode:yellow; Multi-mode:orange;options available for other colours
Fiber Type:SM(G652D,G655C,G657A1,G657A2,G657B3....) MM(OM1,OM2,OM3,OM4)
Fiber count: 2-144
Cable length: 2000M/Drum( customized, MOQ=2000M)
Cable Jacket: Outer sheath Black
